MeasuringRange0

產(chǎn)品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：145

產(chǎn)品咨詢 13352927502

詳細介紹在線留言

Measuring Range

0.040 - 6.00 inches

1.00 - 150.0 mm

The Check-Line TI-25LT Ultrasonic Steel Thickness Gauge accurately measures steel thickness and the extent of corrosion - from only one side!

Standard configuration: In its standard configuration, the Check-Line TI-25LT is factory set to MEASURE STEEL ONLY

Optional configuration: As a “no cost" option, the TI-25LT can be factory set to measure on stainless steel.

Includes NIST-Traceable Calibration Certificate
Resolution of 0.004 inch (0.01 mm)
Large, backlit LCD display retains last reading
Simple operator controls virtually eliminate training
Special-purpose probes are offered for a variety of applications
The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions
Switch-selected units for inches or mm
For underwater surveying, probe cable lengths up to 50 feet are optionally
The TI-25LT probe is waterproof and can be submerged in water
CE Certified
Made in the USA with 5-Year Warranty
IP 65 Rated

Range in Steel	0.040-6.00" (1.00-150.0 mm)
Resolution	.004" (0.01mm)
Display	4? - Digit, 0.5" Backlit LCD
Velocity Range	.0787-.3937 in/µs (2000-10,000 m/sec)
Probe	1/4", 5 MHz, actual wearface is 5/8" (17mm)
Probe Wearface	PEEK (Polyethylethylkytone)
Cable	4ft. (1.2m) waterproof cable with non-polarized, quick-disconnect connectors. Op
Temp. Limits	Ambient: -20 to 120° F (-30 to 50° C) Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available
Battery Type	Two AA batteries
Battery Life	200 hours
Weight	710 ounces (280g)
Dimensions	2.5 x 4..5 x 1.25" (64 x 114 x 32mm)
Accessories	Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Warranty	Gauge: 5 Years Probes: 90 Days

訂貨清單

Complete Kit includes: Gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate and Operating Instruction Manual - all in a foam-fitted carrying case.

配件

TICC-M Protective Holder for Most TI Series Gauges

CF12 Coupling Fluid - 12oz

V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only)

SB4 4 Step Steel Test Block, 0.1 / 0.2 / 0.4 / 0.6 inch - Uncertified

T-102-2000 1/4" diameter, 5.00 MHz, dual element transducer (Standard Probe for TI-25LT)

訂貨型號

TI-25LT Steel Only Ultrasonic Thickness Gauge Kit with T-102-2000 Probe

TI-25LT-SS Stainless-Steel Only Ultrasonic Thickness Gauge Kit with T-102-2000 Probe

相關型號

TI-25LT

TI-25S